Quote 0
Home/Products/Load Securing/Weld-on tensioning ring bar · bent band · 95 × 90 mm · h68 · zinc-plated · 3 T
Weld-on tensioning ring bar · bent band · 95 × 90 mm · h68 · zinc-plated · 3 T

Weld-on tensioning ring bar · bent band · 95 × 90 mm · h68 · zinc-plated · 3 T

Steel · zinc-plated

Bent band tensioning ring bar, in Ø12 zinc-plated bar, with a 95 mm bar over a 90 mm backing plate and 68 mm overall height. The uprights curve so as to move the bar away from the fixing plane. It is welded to the floor or to the side board. 3 T capacity, certified to UNE-EN 12640:2001.

Specifications

Dimensions
Bar of 95 mm × plate of 90 mm · overall height 68 mm · 30 mm (plate to centreline) · 28 mm (clearance under the bar) · bar section 14 mm · plate thickness 3,5 mm · rod Ø12
Weight
0,30 kg
Load (LC)
3 T.
Position
Symmetrical part / not handed
Vehicle area
Inner
Technical data
Rod Ø12 · rail 95 mm · plate 90 mm · height 68 mm · bar section 14 mm · plate 3,5 mm · zinc-plated · 0,30 kg · capacity 3 T · certified to UNE-EN 12640:2001
Type-approval
Part certified to UNE-EN 12640:2001.

Identification

Part number
27070032
Brand
Mekacor
Type
Component
LASHING POINT to EN 12640. The capacity in tonnes is the strength of the POINT the strap is attached to — it is NOT the LC of a lashing device, which is governed by EN 12195-2 and expressed in daN, as two values. The two quantities are neither comparable nor additive.
+351 252 640 260

I would rather write the message now

‹ Back to load securing