Quote 0
Home/Products/Load Securing/Tensioning ring bar · with backing plate and bolts · 95 × 95 mm · zinc-plated · 1 T
Tensioning ring bar · with backing plate and bolts · 95 × 95 mm · zinc-plated · 1 T

Tensioning ring bar · with backing plate and bolts · 95 × 95 mm · zinc-plated · 1 T

Steel · zinc-plated

U-shaped tensioning lashing ring, 95 mm span and 95 mm high, in Ø10.5 zinc-plated bar. Supplied complete, with a 140 × 38 mm backing plate 4.5 mm thick and two M12 × 30 bolts — it passes through the floor and tightens from below, without welding. 1 T capacity, certified to UNE-EN 12640:2001.

Specifications

Dimensions
Ring in U of 95 mm of span × 95 mm high, in rod Ø10,5 mm · plate 140 × 38 mm with e = 4,5 mm · two threads M12 × 30
Weight
0,37 kg
Load (LC)
1 T.
Position
Symmetrical part / not handed
Vehicle area
Inner
Technical data
Ring in U in rod Ø10,5 · opening 95 mm · height 95 mm · plate 140 × 38 × 4,5 mm · 2 bolts M12 × 30 · zinc-plated · 0,37 kg · capacity 1 T · certified to UNE-EN 12640:2001
Type-approval
Part certified to UNE-EN 12640:2001.

Identification

Part number
27070036
Brand
Mekacor
Type
Component
LASHING POINT to EN 12640. The capacity in tonnes is the strength of the POINT the strap is attached to — it is NOT the LC of a lashing device, which is governed by EN 12195-2 and expressed in daN, as two values. The two quantities are neither comparable nor additive.
+351 252 640 260

I would rather write the message now

‹ Back to load securing