
G12-L1-0004
Kit of 2 toolbox gas springs · 100 N · 318 mm · 120 mm stroke
Aço · Tubo pintado preto · haste nitretada preta · terminais zincados
Kit with the two units a toolbox lid takes, 100 N each, which gives 200 N of total thrust. Each gas spring measures 198 to 318 mm closed–open and has a 120 mm stroke, a Ø6 mm black-nitrided piston rod and a Ø15 mm black-painted tube, and comes with the end fittings already on — a Ø5 hole clevis on the rod and a Ø10 ball joint, with an M8 stud, on the tube.
Specifications
- Dimensions
- 2 × amortecedor de 198–318 mm fechado–aberto (±2) · curso 120 mm (±1) · haste Ø6 · tubo Ø15 · 100 N cada · empuxo total 200 N
- Load (LC)
- 20,0 daN de empuxo TOTAL do kit (200 N = 2 × 100 N) — não confundir com LC de cinta.
- Position
- Has a fitting orientation
- Vehicle area
- Toolbox
- Technical data
- Haste Ø6 em nitretação preta · tubo Ø15 pintado preto · terminais zincados passivados brancos (Zn/W): forquilha furo Ø5 (M6) na haste e conjunto de rótula esfera Ø10 (M6 / espiga M8) no tubo · velocidade de extensão VS2 0,1–0,3 m/s · temperatura de serviço −30 °C a +80 °C · tolerâncias ±2 mm no comprimento e ±1 mm no curso · montar com a haste para baixo
Identification
- Brand
- Mekacor
- Type
- Kit
FIT WITH THE ROD DOWNWARDS — express instruction from the manufacturer on the drawing («must be mounted with piston rod down»). It is what keeps the seal lubricated; fitted the other way round it loses force and fails early. DO NOT PAINT OR SAND THE ROD («piston rod should be protected from dust, paint and damage»).
