Quote 0
Home/Products/Gas Springs/Kit of 2 toolbox gas springs · 50 N · 318 mm · 120 mm stroke
Kit of 2 toolbox gas springs · 50 N · 318 mm · 120 mm stroke

G12-L1-0002

Kit of 2 toolbox gas springs · 50 N · 318 mm · 120 mm stroke

Aço · Tubo pintado preto · haste nitretada preta · terminais zincados

Kit with the two units a toolbox lid takes, 50 N each, which gives 100 N of total thrust. Each gas spring measures 198 to 318 mm closed–open and has a 120 mm stroke, a Ø6 mm black-nitrided piston rod and a Ø15 mm black-painted tube, and comes with the end fittings already on — a Ø5 hole clevis on the rod and a Ø10 ball joint, with an M8 stud, on the tube.

Specifications

Dimensions
2 × amortecedor de 198–318 mm fechado–aberto (±2) · curso 120 mm (±1) · haste Ø6 · tubo Ø15 · 50 N cada · empuxo total 100 N
Load (LC)
10,0 daN de empuxo TOTAL do kit (100 N = 2 × 50 N) — não confundir com LC de cinta.
Position
Has a fitting orientation
Vehicle area
Toolbox
Technical data
Haste Ø6 em nitretação preta · tubo Ø15 pintado preto · terminais zincados passivados brancos (Zn/W): forquilha furo Ø5 (M6) na haste e conjunto de rótula esfera Ø10 (M6 / espiga M8) no tubo · velocidade de extensão VS2 0,1–0,3 m/s · temperatura de serviço −30 °C a +80 °C · tolerâncias ±2 mm no comprimento e ±1 mm no curso · montar com a haste para baixo

Identification

Brand
Mekacor
Type
Kit
FIT WITH THE ROD DOWNWARDS — express instruction from the manufacturer on the drawing («must be mounted with piston rod down»). It is what keeps the seal lubricated; fitted the other way round it loses force and fails early. DO NOT PAINT OR SAND THE ROD («piston rod should be protected from dust, paint and damage»).
+351 252 640 260

I would rather write the message now

‹ Back to gas springs