Quote 0
Home/Products/Refrigerated Transport/MRF · Meat Rail Bracket with Detent Pin · stainless steel
MRF · Meat Rail Bracket with Detent Pin · stainless steel
Technical drawing of MRF · Meat Rail Bracket with Detent Pin · stainless steel

MRF · Meat Rail Bracket with Detent Pin · stainless steel

Stainless steel · polished

Stainless steel bracket with two half-jaws and a Ø10 detent PIN, to hold the profile meat rail. Jaw 52 mm wide by 43.5 high and 23 of throat, 60 mm deep, 4 mm plate and two Ø10.5 holes 87.5 mm between centres. 116.2 × 101 mm, 0.366 kg.

Specifications

Dimensions
116,2 × 101,0 mm (width × overall height) · claw 52×43,5 · depth 60 · sheet 4 mm · intermediate height 63,8 · hole centreline at 30,0 from the base
Weight
0,366 kg
Position
Symmetrical part / not handed
Vehicle area
Inner
Technical data
Stainless steel bracket of 2 half-claws with THROUGH PIN of retention ø10,0 · overall height 101,0 mm · claw 52,0 of span × 43,5 high × 23,0 of neck · depth 60,0 · sheet of 4,0 · width 116,2 · 2 holes ø10,5 at 87,5 of pin · intermediate height 63,8 mm · the 2 holes ø10,5 are at 87,5 between centres and at 30,0 from the base

Identification

Part number
27170008
Manufacturer reference
406060201
Brand
MRF
Type
Component
MATERIAL: the manufacturer declares AISI 304 in general, AISI 303 on machined parts and fasteners and AISI 302 on springs. If you need a particular grade, ask us for the material declaration for the reference.
+351 252 640 260

I would rather write the message now

‹ Back to refrigerated transport