Home/Products/Ladders and Steps/Takler Frame A · Frame for the Kargo ladder · hot galvanised · 1210 mm
G19-L4-0001
Takler Frame A · Frame for the Kargo ladder · hot galvanised · 1210 mm
Steel · galvanised (hot-dip)
Frame for a pullout ladder with wide steps, in hot galvanised steel. Frame 1210 mm long by 716 mm outside width, 66 mm profile height, with fixing holes at one end. Weight 10.52 kg. The manufacturer states conformity with UNI EN 131 and a safe working load of 150 kg.
Specifications
- Dimensions
- L=1210 · B=716 · H=100 · S=66 mm
- Weight
- 10,52 kg
- Load (LC)
- 150 kg safe working load (SWL) — declared by the manufacturer under UNI EN 131.
- Position
- Symmetrical part / not handed
- Vehicle area
- Chassis
- Technical data
- Duas longarinas laterais em perfil dobrado, unidas por duas travessas transversais, com tampões nos topos e um gancho de trinco sob a longarina da frente. Furação de fixação numa das extremidades: na longarina de cima um furo redondo ligado a um rasgo oblongo (buraco de fechadura) e na de baixo três furos redondos em linha, o do meio maior. Carga de segurança: 150 kg, UNI EN 131.
- Type-approval
- UNI EN 131 — 150 kg.
Identification
- Manufacturer reference
- TK9710
- Brand
- Takler
- Type
- Component
THIS FRAME IS ESSENTIAL FOR THE LADDERS: they are sold bare, without a frame. Do NOT confuse it with the pull-out ladders, which already come with the frame included and do NOT need this part.
Other products in ladder frames and brackets
G19-L4-0002Takler Frame A · Frame for the Kargo ladder · hot galvanised · 2065 mm
G19-L4-0003Takler Frame B · Frame for the Essentia ladder · hot galvanised · 2065…
G19-L4-0004Takler Chassis · Chassis bracket for the Pivot ladder · hot galvanised
G19-L4-0005Takler Flatbed · Flatbed bracket for the Pivot ladder · hot galvanised
