Quote 0
Home/Products/Side Underrun Protection/Takler Kover 150 · Side Protection Bar · 3500 a 7000 mm · Anodised Aluminium
Takler Kover 150 · Side Protection Bar · 3500 a 7000 mm · Anodised Aluminium
Technical drawing of Takler Kover 150 · Side Protection Bar · 3500 a 7000 mm · Anodised Aluminium

G18-L2-0005

Takler Kover 150 · Side Protection Bar · 3500 a 7000 mm · Anodised Aluminium

Anodised aluminium · anodised

Side protection bar (cyclist guard) in AW6060 anodised aluminium, 49 × 147.4 mm section (nominal height 150). Five lengths — 3500, 4500, 5500, 6500 and 7000 mm, from 5.47 to 10.95 kg. Two-chamber wedge profile joined by a curved skin, with two fixing rails. References TK1510 · TK1520 · TK1530 · TK1540 · TK1550.

Specifications

Dimensions
L = 3500 / 4500 / 5500 / 6500 / 7000 mm · B=49 mm · H=147,4 mm
Weight
5,47 to 10,95 kg depending on the length (1,56 kg/m)
Position
Symmetrical part / not handed
Vehicle area
Side
Technical data
Side guard rail (LPD) for vehicles in categories N2 and N3 and trailers the3 and the4. GEOMETRY: profile OPEN in C elongated: two wedge-shaped closed chambers, one at the top and another at the base, linked by a single curved skin. TWO fixing tracks in T on the rear face — one at the top and another at the base —, twice the fixing points of the profile of 35 × 100. Linear mass 1,56 kg/m — constant across the whole family. Anodised aluminium.
Type-approval
ECE R73 · VCA approval E11 73R01/02*1202*00 · approval mark «APPROVED E11*73R01».

Identification

Manufacturer reference
TK1510-1550 (5 comprimentos)
Brand
Takler
Type
Component
REGULATED RANGE · SIDE UNDERRUN PROTECTION DEVICE (LPD). The approval is of the ASSEMBLED DEVICE, not of the individual part: bar + end piece + cover + bracket + fixing kit make up the approved configuration. UNECE Regulation No. 73 applies; the manufacturer's approvals are to the 01 series of amendments.
+351 252 640 260

I would rather write the message now

‹ Back to side underrun protection