
Piano Hinge · 60 × 2500 mm · stainless steel
Stainless steel AISI 304 · matt stainless steel/brushed
Continuous piano hinge in AISI 304 ESM stainless steel, 60 mm wide by 2500 mm long, in 0.8 mm sheet, with a Ø2 mm pin and a Ø4 mm knuckle. Drilling: Ø3.5 mm holes, the first 16 mm from the end and a pitch of ±73 mm. It is cut to any length on request and the same bar serves both sides, with no handed part. Also known as a «continuous hinge».
Specifications
- Dimensions
- 60×2500 mm · sheet 0,8 · pin Ø2 · holes Ø3,5 @ ±73
- Position
- Symmetrical part / not handed
- Vehicle area
- Crossways
- Technical data
- Series DP08 · sheet 0,8 mm · pin Ø2 mm · width 60 mm · holes Ø3,5 mm, first at 16 mm from the end, pitch ±73 mm · bar of 2 metres, cut to the requested length. AISI 316 2B and AISI 304 ESM — stainless steel only, no zinc-plated or brass. The same series is published in the widths 20, 25, 30, 35, 40, 45, 50, 70, 80 mm. Knuckle Ø4 mm.
Identification
- Part number
- 19020005
- Brand
- Mekacor
- Type
- Component
SIZE TO ORDER: the piano hinge is cut to the length ordered and Ferragibérica also has widths 40, 45 and 50 mm and thicknesses DP10 to DP30.
