
GTO · Lock Catch · to be riveted · zinc-plated
Zinc-plated steel · zinc-plated
Pocket of the GTO lock system, in pressed and zinc-plated steel plate, for riveted fixing. It is the counter-part that receives the hook of the lock: it mounts on the pillar or on the edge of the sideboard and it is where the lock catches. 2 mm plate with a 11 mm flange and two Ø5 holes; it suits both the GTO OP1 and the OP2 locks.
Specifications
- Dimensions
- 28 × 91 mm · flange 11 mm · thickness 2 mm · hole Ø5 mm (the manufacturer quotes 91,5 mm)
- Weight
- 0,055 kg
- Position
- Symmetrical part / not handed
- Vehicle area
- Pillar
- Technical data
- Pressed steel plate, zinc-plated · 91,5 × 28 mm · flange 11 mm · thickness 2 mm · 2 holes Ø5 · 0,060 kg · fixing by RIVET. Counterpart of the locks GTO of the series 230 101-230 108 (model AG / OP2) and 230 135-230 138 (model EG / OP1).
Identification
- Part number
- 18040004
- Brand
- GTO
- Type
- Component
ℵ THREE POCKETS, THREE FIXING METHODS — this is the RIVET-ON one (230 173, zinc-plated). There is the WELD-ON one (230 171, bare) and the mixed weld+rivet one (230 172, zinc-plated). Confirm the fixing method BEFORE ordering: the part has the same function, the installation does not.



